← All work

Quality & certification

Engineering Olympic-grade quality assurance

Flying Sardine needed to demonstrate that every production hydrofoil met the demanding requirements for Olympic competition. We developed the quality-control framework behind its Paris 2024 equipment certification, combining functional measurement methods, precision inspection fixtures and statistical validation into a repeatable production process.

The challenge

The hydrofoils had to meet tight dimensional and functional requirements, with some critical characteristics controlled to ±0.5 mm. Measuring large carbon-composite parts is difficult because they can change shape when removed from the mould or released from a fixture. Flying Sardine needed a method that reflected how each foil worked when assembled, while supporting 100% inspection and independent audits.

What we did

  • Defined a functional GD&T (geometric dimensioning and tolerancing) strategy based on the way each foil is assembled to the mast and board.
  • Designed four precision inspection fixtures and a traceable workflow using calibrated gauges, automated calculations and reporting.
  • Validated the measurement system statistically and added visual, weight, centre-of-gravity and stiffness checks.

Approach

1. Measure the part as it works

Rather than inspect each foil in its free state, we located it as it would sit when assembled to the mast and board. This functional datum strategy accounted for the movement of composite parts and gave production a repeatable basis for dimensional inspection.

Laser-scanning a carbon hydrofoil, with a blue and red alignment overlay tracking surface deviation against the functional datum.
Scanning a foil against its functional datums: the overlay tracks deviation from the assembled shape, not the free state.

2. Build a complete inspection process

We designed four CNC-machined fixtures covering two foil families and two mast geometries. Combined with calibrated gauges, automated calculations and inspection reports, the fixtures created one traceable workflow from locating the part to recording its results. The system was designed for routine inspection, not just occasional engineering checks.

A precision inspection fixture on a granite surface plate, a carbon foil clamped in place, dial and digital gauges reading deviation at labelled datum points, dimensional-control checklist alongside.
One of the four inspection fixtures: a foil located on its functional datums and read on calibrated gauges.

3. Prove the measurements and support certification

We qualified the gauges and inspection process through capability and measurement-system studies (Cg/Cgk, MSA, Cm/Cmk and Cp/Cpk), including operator-to-operator reproducibility. We added visual reference standards for surface defects (limit sample cards) and functional checks for weight, centre of gravity and stiffness. We also prepared the technical documentation and supported International Kiteboarding Association (IKA) and World Sailing audits, including alignment with the newer 3D-scanning verification method for LA 2028.

Process capability (Cpk)Chord length1.86Twist angle1.62Datum offset2.04Wall thickness1.41Mast interface1.78
Illustrative capability indices by characteristic (method only, not the client's real study). Cpk ≥ 1.33 is the conventional bar for a capable process.
Two carbon hydrofoils on a table beneath the World Sailing logo, next to a portable CMM measuring arm, at World Sailing's London headquarters.
At World Sailing's London headquarters, aligning the jig-based inspection with the new 3D-scanning verification for LA 2028.

Outcome

The framework became the reference quality methodology for Flying Sardine’s production and supported its Paris 2024 Olympic equipment certification. It enabled traceable 100% inspection of complex composite foils and provided evidence for independent review. For LA 2028, our role so far has been registration support and aligning the methodology with the new verification process.

Facing a similar challenge?

A first conversation takes about 30 minutes and costs nothing.